Frameintosh Portable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cyberdeck build that uses the Framework 12 mainboard! Based off of the Macintosh Portable (1989).
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 606
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
hello hello! as said in the summary, this is a cyberdeck build for the framework 12, that's based off of the macintosh portable by apple! it uses 4-40 screws + 4-40 heat set inserts. the dimensions for the trackball and screen are pretty guestimated, so if you wanna make this make sure you configure it to whatever components you have.
keyboard shenanigans:
the keyboard dimensions should be for a 60% keyboard. i didn't have time to design a whole keyboard pcb, so i used this open source project's kicad files for the mockup. kudos to them! saved me a lotta time
https://github.com/hw-tinkerers/TR-60

this was my first non FRC cad project, and i'm pretty happy with how it turned out!
here's a little macintosh vs frameintosh comparison:

components layout:


here's how the components (the mainboard and battery) are placed. they have their own little stands in the base piece to be screwed into.
here's how the 4-40s essentially go in:

the expansion cards + power button are hidden in little nooks on the side. i had to make it recessed due to the need for a wider length on the build for the keyboard + trackball

some of my favorite parts:

the hinge area is so clean! i had to do a million edit in contexts to finally get a version that i was satisfied with

the grooves across the laptop are one of my favorite features about the macintosh portable. pretty clean if you ask me😺

another nice screenie of the grooves, but here's some ventilation for the back, as well as some nice design for picking the laptop up. the holes on the edges are where the 4-40's go, and there's holes for 4-40 heat set inserts at the top of the main case. this thing's colors in the screenshots is totally off from the reference images i used, but i'll blame onshape rendering for that. forgot to put it earlier, but i used onshape + kicad (just to get pcb files) for this project.
i can't test out how the hinge works because i...have no 3d printer...but if you try printing it and it doesn't work let me know!
this was definitely a HUGE learning curve for me, and i can tell that my onshape proficiency has risen by a mile. hoorah! 😺😺😺