1 / 7
Magic Wand Confetti Canon — zdjęcie 1
1 / 7

Magic Wand Confetti Canon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a classic looking magic wand that can be loaded with confetti and launched. 3d printable confetti STLs as well.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

i did endless amounts of test printing. obsessing over this print trying to get it perfect. i failed that task. because its not perfect. but i got it to function a few times before the spring was too deformed. sooooo.... if you want to print this the main factor i believe is the material you print it out of. i tried PLA, and PETG. the spring design should work but because of the stress on the material it fails. i highly recommend printing the spring out of a very stiff TPU, or maybe a Nylon, or PC. if you have those materials available to you. I do not currently. the wand itself and the caps can just be printed with normal PLA.

the spring is loaded into the bottom and slides up to the top of the slit. And the caps can just press on. For best results i suggest glueing the bottom cap on to keep it from blowing off from the spring pressure. to compress the spring you pull down on the little lever all the way til it gets to the recess in the slip then just twist the lever over and it locks in place. This is the best time to load in your confetti when your ready to fire you just push the lever to the side out of the recess and it should launch up. i provided a 3d printable confetti however i havent actually test printed it yet. i have had decent results with paper confetti.

now lets talk about the spring. i have designed in removable supports into the spring. but i have also provided a 3mf because to keep the sprint from wiggling around wile printing you do need some supports however the best i found was support enforcers only with boxes on either side of the spring just barely connected. And the spring is printed upwards.

anyway i hope some can find use out of this. i would love to see some feedback and some design ideas. thank you for checking it out.

Tagi