Window Gap Restrictor & Anti-Slam Draft Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
# 🪟 Window Gap Restrictor & Anti-Slam Draft Stopper (Растопырка для окна от сквозняка)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Standard Digital File License
# 🪟 Window Gap Restrictor & Anti-Slam Draft Stopper (Растопырка для окна от сквозняка)
Keep your windows open safely without annoying slamming! This sturdy window wedge holds the window sash open at a fixed distance, allowing fresh air to flow while preventing sudden drafts or wind gusts from slamming the window shut.
---
### ✨ Features
* Anti-Slam Protection: Holds the window sash securely in place during strong drafts.
* Optional Anti-Slip Slots: Features two small recesses on the contact surfaces where you can insert rubber dampeners/pads for extra grip against the window frame. (Note: The restrictor works perfectly fine even without the rubber pads!)
* Multiple Sizes Included: Comes with pre-labeled sizes (e.g., 88 mm, 90 mm, 92 mm) so you can choose the exact gap for your window.
* Strong & Lightweight: Designed with internal truss/rib structures for high strength while minimizing material usage.
* Left & Right Versions: Includes symmetric options for convenient placement on any side of the window.
---
### 🖨 Recommended Print Settings
* Orientation: Print flat on its side for maximum layer strength along the hook arm.
* Supports: Not required.
* Layer Height: 0.20 mm
* Walls / Infill: 3-4 walls, 15–20% infill (Gyroid or Grid recommended).
* Material: PETG or PLA (PETG is highly recommended for better temperature resistance near sunny windows).
---
*If this saved your windows from slamming, feel free to leave a boost 🚀 and upload a photo of your print!*