Grukk Bonebreaker, Warboss | 32mm & 75mm Fantasy Miniature | FDM & Resin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grukk Bonebreaker is a warboss forged for conquest.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Grukk Bonebreaker is a warboss forged for conquest.
Massive even by ork standards, Grukk stands as the iron-fisted ruler of the battlefield—crowned with cruel horns, armored in jagged plates, and bearing a monstrous war axe fit for a king of slaughter. Draped in ragged banners and festooned with skull trophies, he radiates savage authority. Where lesser warriors charge in rage, Grukk commands the full force of the horde, driving his followers forward through intimidation, brutality, and sheer physical dominance.
Legends within the Gravefang Tribe claim that Grukk shattered the spine of a rival chieftain with a single strike, earning the title Bonebreaker and securing his place at the top of the tribe’s bloody hierarchy. He is more than a frontline brute—he is the will of the tribe made flesh, a living standard of violence and conquest.
With his imposing pose, oversized axe, horned helm, layered armor, and trophy-strewn base, Grukk Bonebreaker makes an excellent centerpiece boss miniature for RPG campaigns, warband commanders, or collector display pieces.
Perfect for resin or FDM printing, this model offers crisp, painter-friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.
D&D 5e-Compatible Stats
Large Humanoid (Orc), Chaotic Evil
Challenge Rating: 8 (3,900 XP)
Proficiency Bonus: +3
Armor Class: 17 (warboss armor)
Hit Points: 136 (13d10 + 65)
Speed: 30 ft.
STR | DEX | CON | INT | WIS | CHA |
|---|---|---|---|---|---|
22 (+6) | 12 (+1) | 20 (+5) | 10 (+0) | 14 (+2) | 16 (+3) |
Saving Throws: Str +9, Con +8, Wis +5
Skills: Athletics +9, Intimidation +6, Perception +5
Senses: Darkvision 60 ft., passive Perception 15
Languages: Common, Orc
Abilities
Aggressive. As a bonus action, Grukk can move up to his speed toward a hostile creature he can see.
Warboss Aura. Allied orcs within 30 feet of Grukk who can see or hear him gain advantage on saving throws against being frightened.
Bonebreaker Command. As a bonus action, Grukk can command one allied creature within 30 feet to use its reaction to move up to half its speed or make one weapon attack.
Relentless (1/Day). If Grukk is reduced to 0 hit points but not killed outright, he drops to 1 hit point instead.
Actions
Multiattack. Grukk makes two attacks with his Warboss Axe.
Warboss Axe. Melee Weapon Attack: +9 to hit, reach 10 ft., one target.
Hit: 18 (2d10 + 7) slashing damage.
Skullbreaker Smash (Recharge 5–6). Grukk swings his axe in a devastating arc. Each creature of his choice within 10 feet must make a DC 16 Dexterity saving throw, taking 22 (4d8 + 4) slashing damage on a failed save, or half as much on a successful one.
Roar of Conquest (1/Day). Each enemy of Grukk’s choice within 20 feet that can hear him must succeed on a DC 15 Wisdom saving throw or become frightened until the end of Grukk’s next turn.
⚙ Print Specs
Supports: Standard tree auto supports
Category: Characters & Monsters
Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)
Material: Resin or PLA+ for best detail retention
Scale: Heroic 1:10 (adjustable for tabletop use)
Orientation: Crouched pose with daggers supported
🧱 FDM Printing
Use Tree Supports (Default) for optimal overhang coverage.
Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.
Recommended materials: PLA+ or PETG for best surface finish.
Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.
Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.
🧪 Resin Printing
Use the following settings for reliable, high-detail results:
Printer: Elegoo Saturn 4 Ultra 16K
Exposure Settings:
Layer Height: 0.05 mm
Bottom Layers: 5
Exposure Time: 2.75 s
Bottom Exposure Time: 37 s
Transition Layers: 10 (Linear)
Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s
Advanced Settings:
Anti-Aliasing: Level 8
Print Time Compensation: Enabled (0.93 s)
Light PWM: 255
Bottom Light PWM: 255
Supports & Orientation:
Use Auto Orientation and Auto Supports (Light) in ChituBox.
Ensure proper drainage and avoid flat surfaces directly on the build plate.