1 / 1
Thrak Blackbanner, Banner Bearer | 32mm & 75mm Fantasy Miniature | FDM & Resin — zdjęcie 1

Thrak Blackbanner, Banner Bearer | 32mm & 75mm Fantasy Miniature | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Where the blackened banner rises, the Gravefang are never far behind.

Ocena
0 / 5
Polubienia
4
Pobrania
36
Wydruki
0
Wyświetlenia
69
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Thrak Blackbanner carries more than the standard of the Gravefang Tribe—he carries its reputation.

Where the blackened banner rises, the Gravefang are never far behind.

Thrak earned the honor of bearing the tribe's war standard after surviving a disastrous siege in which every warrior around him fell. Refusing to allow the banner to touch the ground, he fought his way through the enemy line with the shattered pole clutched in one hand and a blood-covered blade in the other. When he returned to the tribe, the banner was torn, burned, and soaked in blood—but still standing.

Since that day, Thrak has marched at the center of every major Gravefang assault.

To the warriors around him, the sight of the Blackbanner is a promise that the tribe has not broken. To their enemies, it means something very different: the Gravefang intend to leave nothing standing.

Thrak is no ceremonial standard bearer. Beneath his battered armor is a veteran warrior capable of holding a battle line while rallying those around him. His banner is covered with trophies, bones, and remnants taken from defeated enemies, each addition recording another Gravefang victory.

With his imposing war standard, heavy armor, brutal weaponry, skull trophies, and commanding battlefield presence, Thrak Blackbanner makes an excellent army standard bearer, elite warrior, encounter commander, or centerpiece for a dark fantasy warband.

Perfect
for resin or FDM
printing
, this model offers crisp,
painter-friendly detail and a dramatic silhouette—ideal for
tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly
elegance.

Thrak Blackbanner — D&D 5e-Compatible Stats

Large Humanoid (Orc), Lawful Evil
Challenge Rating: 5 (1,800 XP)
Proficiency Bonus: +3

Armor Class: 17 (heavy tribal armor)
Hit Points: 102 (12d10 + 36)
Speed: 30 ft.

STR

DEX

CON

INT

WIS

CHA

19 (+4)

12 (+1)

17 (+3)

10 (+0)

14 (+2)

17 (+3)

Saving Throws: Str +7, Con +6, Cha +6
Skills: Athletics +7, Intimidation +6, Perception +5
Senses: Darkvision 60 ft., passive Perception 15
Languages: Common, Orc

Abilities

Blackbanner Aura. Allied orcs within 30 feet of Thrak who can see his banner gain advantage on saving throws against being frightened.

Hold the Standard. While Thrak is conscious and carrying the Blackbanner, allied Gravefang creatures within 30 feet gain a +1 bonus to attack rolls.

Veteran of a Hundred Battles. Thrak has advantage on saving throws against being knocked prone or forcibly moved.

Banner Never Falls. The first time Thrak would be reduced to 0 hit points, he instead drops to 1 hit point. This ability can be used once per day.

Actions

Multiattack. Thrak makes two Black Iron Blade attacks.

Black Iron Blade. Melee Weapon Attack: +7 to hit, reach 5 ft., one target.
Hit: 12 (2d6 + 5) slashing damage.

Banner-Staff Strike. Melee Weapon Attack: +7 to hit, reach 10 ft., one target.
Hit: 10 (1d10 + 5) bludgeoning damage, and the target must succeed on a DC 15 Strength saving throw or be pushed 10 feet.

Rally the Gravefang (Recharge 5–6). Thrak raises the Blackbanner and roars a command. Up to three allied creatures within 30 feet that can hear him may immediately use their reactions to move up to half their speed without provoking opportunity attacks.

Each affected ally also gains 5 temporary hit points.

Bonus Action — March Beneath the Banner

One allied creature within 30 feet gains advantage on its next weapon attack before the start of Thrak's next turn.

⚙ Print Specs

  • Supports: Standard tree auto supports

  • Category: Characters & Monsters

  • Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

  • Material: Resin or PLA+ for best detail retention

  • Scale: Heroic 1:10 (adjustable for tabletop use)

  • Orientation: Crouched pose with daggers supported

🧱 FDM Printing

  • Use Tree Supports (Default) for optimal overhang coverage.

  • Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

  • Recommended materials: PLA+ or PETG for best surface finish.

  • Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

  • Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high-detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

  • Layer Height: 0.05 mm

  • Bottom Layers: 5

  • Exposure Time: 2.75 s

  • Bottom Exposure Time: 37 s

  • Transition Layers: 10 (Linear)

  • Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

  • Anti-Aliasing: Level 8

  • Print Time Compensation: Enabled (0.93 s)

  • Light PWM: 255

  • Bottom Light PWM: 255

Supports & Orientation:

  • Use Auto Orientation and Auto Supports (Light) in ChituBox.

  • Ensure proper drainage and avoid flat surfaces directly on the build plate

Tagi