1 / 1
Cracked Obelisk, Gravefang Runic Monument | 32mm & 75mm Fantasy Terrain | FDM & Resin — zdjęcie 1

Cracked Obelisk, Gravefang Runic Monument | 32mm & 75mm Fantasy Terrain | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No two obelisks tell exactly the same story.

Ocena
0 / 5
Polubienia
6
Pobrania
39
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The Cracked Obelisk is an ancient Gravefang monument carved with symbols whose meanings have survived longer than the warriors who first cut them into stone.

These towering runic markers can be found throughout Gravefang territory—standing beside forgotten roads, guarding burial grounds, marking ancient battlefields, or rising from the center of ruined settlements claimed by the tribe.

No two obelisks tell exactly the same story.

Some record the names of fallen warlords. Others commemorate victories so old that even the Gravefang Death Shamans disagree about what truly happened. A few bear symbols believed to predate the tribe itself, leading some shamans to claim that the Gravefang did not create the oldest monuments at all—they merely inherited them.

The fractures running through the stone are considered sacred rather than signs of decay. According to tribal belief, each crack represents a moment when the barrier between the living world and the realm of the dead weakened.

During rituals, Morgra Skullspeaker and other Gravefang shamans gather around these monuments, placing bones and offerings at their base while attempting to hear the voices of ancient spirits trapped within the stone.

Warriors passing an obelisk before battle often strike its surface with the hilt of a weapon, believing the gesture awakens ancestral spirits and carries their strength into combat.

For tabletop games, the Cracked Obelisk makes an excellent objective marker, ritual location, ancient ruin, magical landmark, dungeon centerpiece, or atmospheric scatter terrain.

Place it beside a Sacrifice Altar to create a ritual site, surround it with Gravefang Totems to form a sacred burial ground, or position it among battlefield ruins as a mysterious monument whose true purpose becomes part of an adventure.

Perfect
for resin or FDM
printing
, this model offers crisp,
painter-friendly detail and a dramatic silhouette—ideal for
tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly
elegance.

⚙Print Specs

  • Supports: Standard tree auto supports

  • Category: Characters & Monsters

  • Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

  • Material: Resin or PLA+ for best detail retention

  • Scale: Heroic 1:10 (adjustable for tabletop use)

  • Orientation: Crouched pose with daggers supported

🧱 FDM Printing

  • Use Tree Supports (Default) for optimal overhang coverage.

  • Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

  • Recommended materials: PLA+ or PETG for best surface finish.

  • Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

  • Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use
the following settings for reliable, high-detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

  • Layer Height: 0.05 mm

  • Bottom Layers: 5

  • Exposure Time: 2.75 s

  • Bottom Exposure Time: 37 s

  • Transition Layers: 10 (Linear)

  • Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

  • Anti-Aliasing: Level 8

  • Print Time Compensation: Enabled (0.93 s)

  • Light PWM: 255

  • Bottom Light PWM: 255

Supports & Orientation:

  • Use Auto Orientation and Auto Supports (Light) in ChituBox.

  • Ensure proper drainage and avoid flat surfaces directly on the build plate.

Tagi