1 / 6
BoboVR S3 Pro hook for Anker Nano for Quest 3 — zdjęcie 1
1 / 6

BoboVR S3 Pro hook for Anker Nano for Quest 3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anker Nano 10000 mAh holder for Meta Quest 3 with BoboVR S3 Pro head strap.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The BoboVR system is really good, however ~30 € for a 5000 mAh powerpack is just to much. If you have a Anker Nano 10000 mAh Powerbank lying around this case with claws will enable you to play for hours longer. The powerbank sits firmly inside but at the same time is easily removable. If you want to make sure use some tape and it will not fall out. 

This is my first attempt and it works really well. However feel free to add suggestions :-)

V2 fits quite tight to the head strap. I tested it and you really have to try hard to make it falling of. 

V1 is quite loose and might fit to other head straps, depending on what you have. 

Easy to print upright with organic support for the claws.

ATTENTION: Do not print it lying on the side as this will result in weaker hooks, potentially damaging both devices if it fails.

ATTENTION: Test your setup without plugging the USB cable into the Quest in order to get a feeling of how hard you have to try to force the powerbank loose. If you don't feel good you can easily apply tape to tighten the setup.