1 / 4
Plunger Pin Holder, Casement Window Screen Latch and Handle, Vent Port, Printer Portable AC — zdjęcie 1
1 / 4

Plunger Pin Holder, Casement Window Screen Latch and Handle, Vent Port, Printer Portable AC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Build your own casement window frame and hold in place with these clips. Good for added and outside printed vent.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These are screw mounted clips that house spring loaded plunger pins.  See photos for pin dimension.  See the photos below.  My use case was a vent for my printer but would be the same for a portable AC unit.  Although these plunger pins are generally used for window screen, you can obviously use them hold other items in place.  If you want to make a little removable panel inside a frame just use these on your panel.  The mounting hole fit a drywall screw, countersunk.

My use case: I build a frame to fit inside my casement window to vent my printer outdoors.  These windows have screen held in place with 4 pins.  My frame:

  1. Fits inside the window box

  2. Is polycarbonate upper section with a plywood bottom section.

  3. Has a 4inch dryer vent penetration for connect and exhaust pipe such as for a portable AC unit or a 3D printer vent.

  4. Locks into place using these printed clips, and can be removed to reinstall the screen.

I printed these with ASA, no supports. 

Tagi