MODRA Print Test Kit – Lock & Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small test kit for checking how MODRA prints and clicks on your printer before printing the full system.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Standard Digital File License
MODRA Print Test Kit
New to MODRA? Print these two small parts first to check how the system performs on your printer.
The kit contains:
• 1 × MODRA Lock
• 1 × MODRA Hook
Both parts use the same type of connection found throughout the MODRA system.
Print the test pieces and check the fit, click and overall feel of the connection before printing larger MODRA components.
What to check
After printing, test:
• Does the lock click into place cleanly?
• Is the connection secure?
• Can you insert and remove by hand with reasonable force?
• Is there too much looseness or play?
The result can vary depending on your printer, filament, extrusion settings and print calibration.
If the test parts work correctly, you can proceed with printing other MODRA components with greater confidence.
Recommended
Print the test parts using the same printer, filament and basic print settings you plan to use for your MODRA components.
No special test setup is required — just print, connect and check the fit.