1 / 1
Moen Faucet Sprayer Aerator Removal Tool (Reinforced Remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same as the original but reinforced
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried the original, but there was enough buildup to snap the pins off before I could put use torque to unscrew the aerator. This remix adds a reinforcement ring to the pins, but it also locates the tool on the aerator.
Print using a stiff filament like PLA, PC, etc.