1 / 2
Hobart N50 Gear Selector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement gear selector for a Hobart N50 5 Quart stand mixer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
After printing, you might find it's really tight on the shaft. I had to use a bit of strength to fit it. Alternatively you can use a bit of sandpaper or a small file to shave a tiny bit of the inside diameter to fit better.
Recommend making it out of a slightly stronger filament than PLA, like PETG or perhaps even nylon. Our initial one of PETG seems to be holding up fine for now though.
