1 / 3
mountain bike disk brake rotor mount for lathe chuck — zdjęcie 1
1 / 3

mountain bike disk brake rotor mount for lathe chuck

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had a rotor with a fairly serious bend in it, so I drew up a mount and made it for the lathe

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

I had a rotor with a fairly serious bend in it, so I drew up a mount and made it for the lathe so I could use a dial indicator and 'tweak' the rotor bit by bit

I used a 1/2 bolt that was long enough to be clamped into the chuck of the lathe

I tapped the holes with a 5mm x .8 pitch .. but a 10-32  tap would work as well.. depends on your hardware available

Tagi