Finger Torture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D-printed illusion where a (fake;-) blade appears to pass straight through your finger.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 2546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License

INTRODUCTION
Finger Torture is a 3D-printed adaptation of an illusion originally designed for stage performance. I originally created this pocket version for Tenyo, a Japanese company specializing in magic toys.
A blade appears to pass directly through your finger, yet when the triangular frame is removed, your finger is completely unharmed.
The complete construction and handling are explained in the accompanying video.
PRINTING INSTRUCTIONS
Material: PLA or PETG
Layer height: 0.20 mm
Nozzle: 0.4 or 0.6 mm
Infill: 20% or more
Supports: None
Print orientation: Print the files as provided. The triangle should be printed with the notch facing the build plate. The handle should be printed vertically, with the slot directly on the build plate.
Brim: Required for the handle
Number of printed parts: 4 — the main triangular frame, the blade handle, and the two tools used to create the V-shape in the blade.
You will also need:
a small 6 mm wide metal measuring tape. The cheapest type is fine. These mini measuring tapes are widely available online and are usually 6 mm wide.
Scissors, preferably an old pair, as you will be cutting the thin metal strip from the measuring tape.
Adhesive tape
Krazy Glue or similar instant glue
THE PRINCIPLE
The illusion relies on two principles. Inside the triangular frame, there are two possible channels for the blade. Depending on its position, the blade either passes through the opening or travels around the finger.
The second principle is the blade itself. It is NOT A BLADE , but made from thin spring steel taken from a metal measuring tape. By modifying its shape, the metal part becomes flexible enough to bend when necessary while still looking and feeling like a rigid metal blade. Together, these two principles create the illusion that the blade passes directly through the finger.
FABRICATION & ASSEMBLY
After printing, remove the brim from the handle. First, cut a suitable length of measuring tape, slightly longer than the printed tools. The measuring tape is very flexible. To make it look and behave more like a rigid blade, it needs to be reshaped.
Place the measuring tape piece with the printed side facing up, then use the second printed accessory to press along the center of the tape, creating a V-shaped profile.
Repeat this with a second piece. Tape the two pieces together along most of their surface, keeping them aligned and with the printed sides facing the same direction.
Fold the assembly as shown in the video and squeeze the two pieces together. This creates the finished « blade ».
Cut the end of the « blade » to create a slightly rounded, katana-like tip. This makes it easier for the « blade » to enter the correct channel inside the triangular frame. Apply a small amount of Krazy Glue to the slot in the handle and place the « blade » all the way into the slot.
You can use the pointed tool you used to shape the measuring tape to check the length of the blade. I made it exactly the length needed for the finished blade before gluing it. ;-)
The accompanying video is strongly recommended, as the fabrication process and exact shaping of the blade are much easier to understand visually.
PERFORMANCE
Place the « blade » in the triangular frame in the correct position to show that the it passes through the triangle. Remove it, insert your finger into the opening, and carefully push the « blade » through the frame, forcing it to enter the second channel.
The « blade » then follows the safe channel around your finger. Because of the internal geometry of the frame.
You should NEVER feel the tip of the « blade » against your finger.
IF YOU FEEL THE « BLADE », YOU ARE NOT IN THE CORRECT CHANNEL. DO NOT PUSH!
Once the « blade » is apparently passing through your finger, you can remove the sword and then remove the triangular frame from your finger, revealing that your finger is completely unharmed.
The effect is extremely visual and can be performed slowly, allowing the spectator to clearly see the blade apparently passing through the finger.
SAFETY & HANDLING
This effect uses a real metal strip. Although the principle is designed to be safe when used correctly, the pointed tip can still poke you, so always work carefully. The « blade » must be positioned in the correct internal channel before it is pushed toward the finger.
Never push the « blade » against your finger if you can feel the tip.
If you feel the tip of the blade touching your finger, stop immediately. The blade is not in the correct channel.
Accessing the secret channel requires some force, especially when the piece is freshly printed. It will become easier after a few practice attempts.
NEVER PERFORM THIS ON SOMEONE ELSE’S FINGER!
You cannot rely on someone else accurately feeling or communicating what is happening inside the apparatus.
Practice the complete handling slowly before performing it.
TIPS & IDEAS
Practice in front of a mirror to understand the visual angle.
Practice the handling slowly until you can reliably find the correct channel.
The accompanying video is strongly recommended for the exact handling and positioning.
LICENSE — NON-COMMERCIAL USE ONLY
This design is provided for personal and non-commercial use only.
You may:
* Download and print the design for your personal use.
* Use the printed object for your own personal use.
* Share photos or videos of your creations, provided that Mathieu Bich is credited and the original Printables page is linked.
You may not:
* Sell or redistribute the STL files.
* Upload or share the STL files on other platforms.
* Sell the printed objects.
* Use the design or printed parts for commercial purposes.
* Modify and redistribute the design or modified STL files.
* Use the design for print-on-demand or manufacturing services.
Commercial use requires prior written permission from Mathieu Bich.
SUPPORT MY WORK
If you enjoy my magic and would like to support my work, you can support me on Patreon (nothing on it yet, but soon ;-)
ABOUT THE CREATOR
Created by Mathieu Bich, professional magician and creative consultant.
If you are looking for a magician for an event, or for creative consulting and magic design for a project, you can discover my professional work here:
Or simply search for Mathieu Bich on YouTube and discover magicians from around the world performing magic I have created. 😉