sickbc250
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AMD BC 250 simple bench support.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I wanted a quick and simple way to test the bc 250 with some leftover parts I already had, an atx psu and 3 x 140mm fans.
BOM:
1 x amd bc 250 board
1 x atx psu (mine is coolermaster rs-500-acaa-b1)
3 x 140mm pwm fans (mine are thermalTake tt-1425 cl-f080-pl14sw-a which come with their own argb controller which is sata powered)
1 x pwm controller (I've used the fan-k02 https://www.amazon.it/dp/B0DCN9YVKY )
6 x fan plastic screws (mine were included with the fans)
5 x pc screws (2 for the psu, 2 for the connector, 1 I used to fix some cables)
2 x M3 screws with nut
N x fasteners to fix cables
Printing:
I've used 90g of ABS filament, 101% size, 2 walls/top/bottom, 20% infill, no supports, put the flat part of every stl on the plate.
Source:
The file sickbc250.scad has all the source, so one could modify it for example to use 120mm fans instead of 140mm,
and maybe to add an enclosure which is something I'd like to do myself...
... but now I have too many projects an I am too busy, maybe in the future... ;)
Software tested:
this quake bootable linux works great!
https://github.com/ciscon/quake-bootable
come play with us!
:)