Grill with text for 60 cm kitchen furniture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this ventilation grille to fill the gap left in my 60 cm kitchen cabinet after replacing a built-in microwave
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this ventilation grille to fill the gap left in my 60 cm kitchen cabinet after replacing a built-in microwave oven (see the picture).
Dimensions:
Height: 70 mm
Width: 595 mm
Design details: The model is split into 3 separate parts to fit standard 3D printer beds and to allow printing without supports and fits to typical 210x210 bed. The text is extruded and elegantly supported by the grille structure itself.
Printing recommendations:
Material: PLA works perfectly fine. However, if your microwave generates a lot of heat upwards, consider using PETG for better heat resistance.
Infill: 20% - 40% (gives it nice weight and rigidity).
Supports: None needed.
Layer height: 0.2 mm recommended for the best surface finish
Attached original Fusion360 drawing for adjustments (not parametrized design).