Seatbelt Pusher – Car Seat Belt Release Assistive Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed leverage tool to easily push and release car seatbelt buttons for users with limited hand strength.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
### Overview
The Seatbelt Pusher is a simple yet effective 3D-printed assistive device designed to help individuals unbuckle car seatbelts effortlessly. By extending leverage and offering a larger surface area, it allows users to depress the red seatbelt release button with minimal finger strength.
### Who is this for?
Designed for drivers and passengers facing hand or finger limitations, including:
- Individuals with arthritis, gout, or joint pain
- Reduced grip strength or limited finger dexterity
- Elderly individuals or those recovering from hand injuries
### Purpose & Key Features
- Effortless Unbuckling: Leverages physical advantage so pressing the tight seatbelt button requires minimal force.
- Improved Reach: Helps access tight spaces between the car seat and central console.
- Portable & Lightweight: Easy to keep inside the vehicle, attached to a lanyard, or stored nearby.
### Recommended Print Settings
- Material: PETG or PLA (PETG recommended for heat resistance in cars)
- Layer Height: 0.2 mm
- Infill: 25% – 30%
- Perimeters / Walls: 3 to 4 walls for added stiffness
- Supports: No supports needed
- Printer Type: FDM Printer
### Credits & Attribution
- Original Project: Seatbelt Pusher
- Designed with: Tikkun Olam Makers (TOM) & Vanderbilt University
- Original Source: [TOM Global](https://tomglobal.org/project/seatbelt-pusher-6597427ba41b5427742e8005)
- License: Creative Commons - Attribution - Share Alike (CC BY-SA 4.0)