JGAurora A5 printhead model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Disclaimer: This is not an official model by JGAurora or even based on official measures. All measurements for this…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 543
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Disclaimer: This is not an official model by JGAurora or even based on official measures. All measurements for this model were taken from my JGAurora A5 printhead and may be different on your printer. Before taking this model as a base for your own modifications, verify the measurements on your printer.
Recommended upgrades
A good start for upgrades is adding a bed leveling sensor, e.g. by using my JGAurora A5 3D-Touch sidemount:
If you need a vinyl cutter you might consider adding a drag-knife to the print-head with the JGAurora A5 E3D drag knife mount [vinyl cutter]:
