1 / 3
Skadis Holder for Gates Belt Tension Gauge — zdjęcie 1
1 / 3

Skadis Holder for Gates Belt Tension Gauge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple holder for the spring version of the Gates Carbon Drive tension gauge.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This mount will hold your Tension gauge securely.

The fit is on the tighter side. So I recommend to use some type of security clip to stop the mount from slipping upwards, just in case. Its not required though. I printed it upside down (the other way than in the pics) with automatic supports. I would not recommend printing it upright on the small C shaped side (the one facing forward in the printer pic) to get the hooks print in a more stable orientation, as the model relies on the larger fillet in the tool slot to be precise.

Printed in PETG, 3 perimeters, 15% Gyroid, everything else was stock 0.15 Structural with the apppropriate filament profile.

Tagi