FlowTray Series – Game 6 | Stackable Board-Game Organizer With Lids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable board-game organizer with six compartments and broad retrieval ramps for tokens, dice and small pieces.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sort board-game components and tabletop accessories with the FlowTray Series – Game 6.
Six equal compartments provide space for tokens, counters, smaller dice and other loose game pieces. Each compartment includes a broad sloped retrieval surface to make small items easier to pick up.
### Features
- Six equally sized compartments in a 3 × 2 layout.
- Broad 10 mm retrieval ramp in every compartment.
- Rounded internal corners.
- Generic dimensions suitable for different games and accessories.
- Stackable with all organizer trays in the FlowTray Series.
- Single-piece design with no assembly, magnets or additional hardware required.
### Dimensions
- Overall size: 168 × 118 × 30 mm.
- Six compartment openings: 52.8 × 55.4 mm each.
- Retrieval-ramp rise and run: 10 mm.
- Nominal wall thickness: 2.4 mm.
- Nominal base thickness: 4.8 mm.
The dimensions describe the nominal openings below the rim chamfer. Rounded corners and retrieval ramps reduce the completely flat base area. Measure larger components before printing; the organizer is not designed for one specific game.
### Stacking
The underside locates inside the rim of the tray below, allowing different FlowTray Series layouts to be combined in one stack.
Keep all game pieces below the stacking area before placing another tray on top. The trays are gravity-stacked and centered by their geometry; they do not use a snap-fit or locking mechanism. This is an open organizer, not a closed transport box.
### Suggested print settings
- Orientation: flat base on the build plate, compartments facing up.
- Nozzle: 0.4 mm.
- Layer height: 0.20 mm.
- Walls: 3 perimeters.
- Bottom layers: 5.
- Infill: 15–20%.
- Supports: designed to print without supports.
- Material: PLA is a suitable starting option for dry indoor storage.
These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale to preserve stacking compatibility.
### Files and validation
STL, STEP and a geometry-only 3MF are provided together with the editable CAD source. The 3MF does not contain a configured printer profile.
The geometry has been digitally checked as a closed, single-part mesh. The STEP file was successfully re-imported and the 3MF geometry matches the STL.
The model has not yet been physically test-printed or slicer-tested. Actual fit depends on your printer, filament and print settings. All preview images are CAD renderings, not photographs of a printed model.
If you print it, please share a Make and let me know how the compartment layout and stacking fit work for you.