FlowTray Series – Cushion Holder | DIY Pincushion Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Removable DIY pincushion insert designed for the FlowTray Series – Sewing 8 organizer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Create a removable pincushion insert for the FlowTray Series – Sewing 8 with the FlowTray Series – Cushion Holder.
The printed part forms a shallow holder for fabric and suitable padding. It fits the dedicated bay in Sewing 8 and can be removed when needed.
### Features
- Designed for the Cushion Holder bay in FlowTray Series – Sewing 8.
- Removable insert for a user-made fabric pincushion.
- Rounded internal corners.
- Single-piece print with no supports required.
- Fabric, padding and fastening materials can be selected to suit your project.
### Dimensions
- Overall size: 64.8 × 82.6 × 12 mm.
- Nominal inner area: 60.8 × 78.6 mm.
- Nominal outer wall thickness: 2 mm.
- Nominal base thickness: 2.4 mm.
All dimensions are nominal. The insert has nominally 0.6 mm clearance per side in the Sewing 8 bay. Actual fit depends on printer calibration, filament and first-layer settings.
### Important use information
This file contains the printed holder only. Add and secure your own fabric and suitable padding. The insert itself is not a complete pincushion and does not have a stacking interface.
Secure the filling appropriately and handle needles carefully. Do not transport loose needles in an open tray. Remove any cushion or needles that extend into the stacking area before placing another FlowTray on top of Sewing 8.
### Suggested print settings
- Orientation: flat base on the build plate, opening facing up.
- Nozzle: 0.4 mm.
- Layer height: 0.20 mm.
- Walls: 3 perimeters.
- Bottom layers: 5.
- Infill: 15–20%.
- Supports: designed to print without supports.
- Material: PLA is a suitable starting option for dry indoor use.
These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale to preserve compatibility with Sewing 8.
### Files and validation
STL, STEP and a geometry-only 3MF are provided together with the editable CAD source. The 3MF does not contain a configured printer profile.
The geometry has been digitally checked as a closed, single-part mesh. The STEP file was successfully re-imported and the 3MF geometry matches the STL.
The model has not yet been physically test-printed or slicer-tested. Actual fit depends on your printer, filament and print settings. All preview images are CAD renderings, not photographs of a printed model.
If you print it, please share a Make and let me know how the insert fits in your Sewing 8 tray.