Lithophane Light Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Light box to illuminate your favorite scenes.
- Ocena
- 4,8 / 5
- Polubienia
- 109
- Pobrania
- 624
- Wydruki
- 4
- Wyświetlenia
- 4052
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Made the top, corners and bottom separate pieces. The corners are a snug fit as I designed them to be glue free but not loose enough to come apart unintentionally. This gives you the option to swap out photos. You can also make them permanent with a little super glue. Just don't glue the top litho panel so you can slide it out to turn the light on! I used a battery operated LED light puck from Wal-Mart that slides right in to the bottom hole feature.
Colorize your lithos by printing the photo on a transparency or plain white paper and glue to the back of the litho panel.
UPDATE: Included a few designs for the top panel and added photos of a few completed boxes.
OVERHANG SUPPORT: needed for the legs and the top panel. See photo example for recommended support areas.
You get two in a pack for $9.00. >> https://www.walmart.com/ip/GE-LED-Wireless-Puck-Lights-Battery-Operated-Touch-Activated-2-Pack/168006227
Corners can be printed flat without support.
I use Flat Lithophane Maker >> https://lithophanemaker.com/Framed%20Lithophane.html for the litho photo stl generation.
Dimensions for the lithograph side panels are 98mm x 105mm x 3mm.
Dimensions for the top panel are 105mm x 110mm x 3mm.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
.02
Infill:
15%
Filament: GizmoDorks PLA Black
Category: Decor