FlowTray Series – Office 7 | Stackable Desk Organizer With Lids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable desk organizer with a long pen channel and six compartments for small office supplies.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep pens, markers and small office supplies organized with the FlowTray Series – Office 7.
The tray combines one long pen channel with six equally sized compartments for clips, erasers, staples, USB drives, measuring tools and other desk accessories. The compatible FlowTray Series footprint allows the organizer to be stacked with different layouts.
### Features
- Long channel for pens, markers and similar tools.
- Six compartments for small office and desk accessories.
- Sloped retrieval surface in the pen channel.
- Rounded internal corners.
- Stackable with all organizer trays in the FlowTray Series.
- Single-piece design with no magnets or additional hardware required.
### Dimensions
- Overall size: 168 × 118 × 24 mm.
- Pen channel: 163.2 × 30 mm.
- Six accessory compartments: 52.8 × 39.2 mm each.
- Nominal wall thickness: 2.4 mm.
- Nominal base thickness: 4.8 mm.
All dimensions are nominal. Rounded corners reduce the usable area for rectangular objects. The removable Pen & Brush Cup fits into any of the six accessory compartments with nominal 0.6 mm clearance per side. No fit is guaranteed for a specific pen, product or brand.
### Stacking
The underside locates inside the rim of the tray below, allowing different FlowTray Series layouts to be combined in one stack.
Remove pens, the cup and any other objects that extend above the stacking area before placing another tray on top. The trays are gravity-stacked and centered by their geometry; they do not use a snap-fit or locking mechanism.
### Suggested print settings
- Orientation: flat base on the build plate, compartments facing up.
- Nozzle: 0.4 mm.
- Layer height: 0.20 mm.
- Walls: 3 perimeters.
- Bottom layers: 5.
- Infill: 15–20%.
- Supports: designed to print without supports.
- Material: PLA is a suitable starting option for dry indoor storage.
These are suggested starting settings, not a tested print profile. Use the appropriate profile for your printer and filament, inspect the sliced preview and print at 100% scale to preserve stacking and insert compatibility.
### Files and validation
STL, STEP and a geometry-only 3MF are provided together with the editable CAD source. The 3MF does not contain a configured printer profile.
The geometry has been digitally checked as a closed, single-part mesh. The STEP file was successfully re-imported and the 3MF geometry matches the STL.
The model has not yet been physically test-printed or slicer-tested. Actual fit depends on your printer, filament and print settings. All preview images are CAD renderings, not photographs of a printed model.
If you print it, please share a Make and let me know how the cup and stacking fit work on your printer.