Cabbage Hanger for Chickens
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a Cabbage hanger for our chickens. designed a simple screw for screwing into the cabbage and some holes on the…
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 150
- Wydruki
- 3
- Wyświetlenia
- 992
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Needed a Cabbage hanger for our chickens. designed a simple screw for screwing into the cabbage and some holes on the back for string. have used it and works well so far. we put a quartered piece of watermelon on it to, this also worked well.
print with 3 perimeters or more, and at least 50% infill to make a stronger part for twisting into cabbage.
I printed with PLA and withstood screwing into watermelon skin.
28/3/2020 - V2 STL uploaded, slightly adjusted design. Different pitch and bigger hole for easier hanging.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Filament: any PLA any
Notes:
Try 50% infill and 3 perimeters or more. will make for a stronger part for screwing into harder fruit or veg
Category: 3D Printing