1 / 2
Rebar chair
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Supports rebars (5mm - 25mm) off the ground for pouring concrete
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Open Community License v1.1 + Research & Development v1
A rebar chair is a small support that holds steel reinforcing bars (rebar) at a set height above the ground or formwork before concrete is poured. This keeps the rebar in the right position within the slab, so it ends up with the proper concrete cover and doesn't sink to the bottom, where it would be weaker and prone to rust.
Filament requirements (use at least 3 wall loops for strength)
Regular - 10g (fits 5mm-15mm rebar)
L - 20g (fits 15mm-20mm)
XL - 30g (20mm+) [there's almost zero chance you need this one]