TicTac Gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fun 3D-printed Tic Tac dispenser designed to hold a Tic Tac container and dispense individual mints.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🍬 3D Printed Tic Tac Gun
This is a fun 3D-printed Tic Tac gun that I came up with as a novelty project!
🛠 Assembly
It should fit most standard Tic Tac containers. First, remove the plastic insert from the Tic Tac container. Then flip the gun upside down and attach the container. It should fit snugly.
For the spring inside the gun, I used a spring from the clicky part of a ballpoint pen. You can use another spring as long as it is approximately the same size.
There are a couple of ways to secure the two halves together. You can glue one half to the other or use screws to clamp and secure both halves.
I used M3 socket-head screws, and I’ve included a link to the screws I used below.