Bellini dining chair white Feet item code 48870
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bellini dining chair white Feet item code 48870
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bellini dining chair white Feet item code 48870
These are about a 14/5 year old dinning Chairs white leather metal square legs that have thin plastic push in feet that end up being pushed into the chairs leg and scratching your floor over time.
so i made new ones to replace the old ones, the factory ones foot was only 2.8mm thick, made them 3.40mm, some would say that's FA aka not much but you try to keep it looking as it should.
I printed it in PetG and put a stick on pad to keep it from scratching my tiles
For some reason some metal square were different widths just a hair off or 2, so best way i did for some that were slightly wider i just used the thick handle side of a butter knife to put a slight dint on the edge if the leg to make it a snug fit.
Ive added 2 files one stl had one chair foot in it and the other has 4.