1 / 2
Voron V2.4 Z Umbilical Gantry Retaining Plate — zdjęcie 1
1 / 2

Voron V2.4 Z Umbilical Gantry Retaining Plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple z umbilical gantry mounted retaining plate. Designed around 20mm bed standoffs, check your printer before using

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I needed a simple Z umbilical retaining plate for my Voron V2.4 during its Stealth Changer conversion so I threw this together quickly.  ***I USE 20MM BED STANDOFFS*** due to using a chamber heater, so I needed to raise my bed some, so my bed sits higher than stock, meaning this might not work for some printers. Please double check and all take all necessary measurements before using this, to make sure it works for your printer. I'd hate for someone to install this and crash the rear of their gantry and break something because it isn't compatible due to not checking.  

Uses (3) M5x8 screws and (3) M5 roll in t-nuts.

Original Solidworks design file, STEP and STL files included.

Thanks for your interest in my model(s) and page! 

Tagi