1 / 2
Strap mount enclosure for reTerminal sticky — zdjęcie 1
1 / 2

Strap mount enclosure for reTerminal sticky

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This design allows straps and a carabiner to attach to the Sticky.

Ocena
0 / 5
Polubienia
0
Pobrania
20
Wydruki
0
Wyświetlenia
174
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This enclosure is designed specifically for Sticky, the 3.97-inch AI-powered magnetic ePaper display from Seeed Studio. This design allows the use of straps and a carabiner to attach to the Sticky. 

Get your own reTerminal Sticky through this link 

Follow the steps below to assemble the enclosure.

1 : Cut a 15 mm strap at your preferred length. 

2 : Run the strap through the slot 

3 : Use a heat source and melt the two ends of the strap together. Press it to make the strap into a loop. 

4: Now place the end in the slot opening. 

5: Place the sticky and button caps onto the main body 

6: Close the back plate 

Tagi