Virgin Mary – Hexagon Lithophane LED Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Virgin Mary lithophane in a hexagonal LED lamp housing. A detailed illuminated decoration and thoughtful handmade gift.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
✨ Virgin Mary – Hexagon Lithophane LED Lamp ✨
Bring a peaceful glow into your home with this detailed Virgin Mary lithophane lamp. The portrait features Mary with a flowing veil, downcast eyes and her hands held around the heart motif. When illuminated from behind, the details appear through variations in the printed material’s thickness. 🤍
Display it on a shelf, desk or sideboard, or print it as a thoughtful handmade gift for someone special. 🎁
💡 Choose warm lighting for a soft, traditional look, or use RGB LEDs to illuminate the portrait in your preferred color.
📦 Included in the 3MF
• Plate 1: Virgin Mary lithophane panel
• Plate 2: Hexagonal lamp housing
• Separate print settings for the panel and housing
The parts print separately, so a multicolor printing system is not required.
📏 Dimensions at the supplied scale
• Housing: approximately 175 × 152 × 36 mm
• Lithophane panel: approximately 171 × 148 mm, with a maximum thickness of 6 mm
🖨 Lithophane Print Settings
Setting | Value |
|---|---|
Material | White PLA |
Saved filament profile | Creality Hyper PLA |
Nozzle diameter | 0.4 mm |
Layer height | 0.16 mm |
First layer height | 0.20 mm |
Wall loops | 1 |
Infill density | 100% |
Infill pattern | Concentric |
Top shell layers | 6 |
Minimum top shell thickness | 1.0 mm |
Bottom shell layers | 0 |
Wall generator | Classic |
Seam position | Aligned |
Ironing | Disabled |
Print orientation | Upright, as arranged in the 3MF |
⚡ Lithophane Speed Settings
Setting | Speed |
|---|---|
Outer wall | 120 mm/s |
Inner wall | 120 mm/s |
Infill | 120 mm/s |
Internal solid infill | 120 mm/s |
Top surface | 120 mm/s |
Gap infill | 120 mm/s |
First layer | 60 mm/s |
First layer infill | 60 mm/s |
Supports | 120 mm/s |
Support interface | 80 mm/s |
External bridges | 25 mm/s |
Internal bridges | 50 mm/s |
Travel | 500 mm/s |
These are the configured speeds. Actual speeds can be lower due to acceleration, cooling, overhang settings and printer limits.
⚙ Acceleration
• Default printing acceleration: 1,000 mm/s²
• Outer and inner walls: 1,000 mm/s²
• First layer: 1,000 mm/s²
• Top surface: 1,000 mm/s²
• Travel: 1,000 mm/s²
• Infill: 100% of default acceleration
• Internal solid infill: 80% of default acceleration
🌡 Temperature & Cooling
Setting | Value |
|---|---|
Nozzle temperature | 220°C |
First layer nozzle temperature | 220°C |
Bed temperature | 60°C |
Selected build plate | Epoxy Resin Plate |
Part cooling fan | 100% after the first layer |
Fan disabled | First layer |
Slow down for layer cooling | Enabled |
Minimum layer time target | 8 seconds |
Minimum print speed for cooling | 20 mm/s |
Filament flow ratio | 0.97 |
Maximum volumetric speed | 23 mm³/s |
🧵 Line Widths
• Default / outer wall: 0.42 mm
• Inner wall: 0.45 mm
• Infill: 0.45 mm
• Internal solid infill / top surface: 0.42 mm
• First layer: 0.50 mm
🛠 Adhesion & Supports
• Brim type: Inner only
• Brim width: 8 mm
• Brim-to-object gap: 0.10 mm
• Supports: Enabled
• Support type: Normal, manual
• Supports on build plate only: Enabled
• Top and bottom support Z distance: 0.20 mm
• Support interface layers: 2 top / 2 bottom
• Raft: Disabled
Manual supports are selected in the project. Check the sliced preview to confirm where supports and brim are actually generated.
⬛ Housing Print Settings
The housing uses its own settings. Do not apply its lower infill density to the lithophane panel.
Setting | Value |
|---|---|
Material | Black PLA |
Nozzle diameter | 0.4 mm |
Layer height | 0.24 mm |
First layer height | 0.20 mm |
Wall loops | 2 |
Infill density | 15% |
Infill pattern | Grid |
Top shell layers | 6 |
Bottom shell layers | 4 |
Supports | Disabled |
Brim | Disabled |
Outer wall speed | 150 mm/s |
Inner wall speed | 300 mm/s |
Infill speed | 250 mm/s |
Internal solid infill speed | 270 mm/s |
Top surface speed | 200 mm/s |
First layer / first layer infill | 60 mm/s |
Nozzle / bed temperature | 220°C / 60°C |
📌 Before Printing
The supplied settings use a Creality Hi profile with a 0.4 mm nozzle in Creality Print. Select your own printer and compatible build plate before slicing, and check that the individual object settings are retained.
Adjust temperatures, flow ratio and speeds to suit your filament and printer.
💡 Lighting & Assembly
Print the white lithophane panel and the housing separately, remove any generated supports or brim, and assemble them with suitable LED lighting behind the panel. LED hardware and its power supply are separate components.
White PLA lets the illuminated details show clearly, while the black housing frames the portrait beautifully. ✨
📸 Share Your Make!
I’d love to see your printed lamp! Feel free to upload a Make and show how you display it and which lighting color you chose. 🤍😊