IKEA SKÅDIS Lubricant Bottle Holder — Ø32 mm, Replaceable Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact holder for a Ø32 mm lubricant bottle. Replaceable SKÅDIS hook, 2 mm vent hole, and A1 mini 0.20 mm profile.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
IKEA SKÅDIS holder for a 32 mm 3D-printer lubricant bottle. The cup has a 33 mm internal diameter, 35 mm height, a rounded insertion rim and a centered 2 mm pressure-relief hole. A separate replaceable hook slides into the external rear channel, leaving the bottle bore clear. Measure the widest part of your bottle before printing.
Included files: holder STL, separate hook STL, editable holder STEP and Bambu Studio A1 mini 3MF project. Suggested starting settings: Generic PLA, 0.20 mm layers, 0.4 mm nozzle, three walls, 15% gyroid infill for the cup and 50% for the hook, no supports. Print the parts in the supplied orientation at 100% scale. Test the hook fit before hanging a filled bottle.
Assembly: print both parts, slide the hook into the rear channel from above until fully seated, then install the holder on the SKÅDIS board and insert the bottle.
Remix attribution: the replaceable hook and mating interface are based on “SKADIS Universal Hook - base and modified hooks” by galvanization: https://www.printables.com/model/183085-skadis-universal-hook-base-and-modified-hooks . Original and remix license: CC BY 4.0. Dimensions and fit should be checked for your own bottle and board.