Recessed Sinar / Horseman lens panel technical camera Copal 0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a recessed lens panel for Sinar and Horseman technical cameras, made out of 3mm MDF.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a recessed lens panel for Sinar and Horseman technical cameras, made out of 3mm MDF. I am using black through coloured MDF, but you can certainly paint it afterward (maybe even helps to cover up small gaps). The panel is recessed by 43mm. Space for the lens is a 100mm square, which fits the Horseman lens I am aiming to use with this. Do check fit and access for your lens, and also check cable release routing.
I used 0.15mm cutting kerf compensation to make sure the parts fit together snugly, your laser might behave differently.
Lasercut and assembled, used a Record 044 plough plane to reduce the thickness on the edges. Working well. Could use more recess, I want to use the 75mm Topcor with my DSLR, and that sits back from the regular ground glass position, and it doesn't focus very far currently.