1 / 1
Felgenschutzclip // Wheel Rim Protection Clip — zdjęcie 1

Felgenschutzclip // Wheel Rim Protection Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Protection Clip for König Easy Fit Snow Chain.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

An meiner König Easy Fit CU-9 100 Schneekette ist einer der Felgenschutzclips verloren gegangen. Dieses Modell ist eine Nachbildung der originalen Clips.

Sie sind gedruckt mit Prusament ASA Natural auf einem Core ONE mit 0.4mm High Flow ObXidian™ Düse. Basis ist das Profil 0.15mm STRUCTURAL mit folgenden Änderungen (siehe 3mf-Datei):

  • Brim (nur an "part")

  • Stützen nur auf dem Druckbett

  • 3 Perimeter

  • massive Schichten oben 5 / Boden 4

  • Infill 20% Gyroid

  • Länge des Infill-Ankers 15%

Die Einstellung des Rands an nur einem der beiden Objekte geht im Experten-Modus des Prusa-Slicers (Rechtsklick, Einstellungen hinzufügen, Schürze und Rand).

Habe "part" auch testweise auf dem Pilzkopf liegend bzw. mit 45° Winkel gedruckt; das beste Ergebnis hatte ich aber tatsächlich bei 90° (der Stift horizontal).


I lost one of the rim protection clips on my König Easy Fit CU-9 100 snow chain. This model is a replica of the original clips.

They were printed with Prusament ASA on a Core ONE using a 0.4mm High Flow ObXidian™ nozzle. The base profile is 0.15mm STRUCTURAL with the following modifications (see 3MF file):

  • Brim (only on “part”)

  • Supports only on the print bed

  • 3 perimeter layers

  • Solid layers: top 5 / bottom 4

  • Infill 20% Gyroid

  • Infill anchor length 15%

You can adjust the brim settings for just one of the two objects in the Prusa Slicer’s Expert Mode (right-click, Add Settings, Skirt and Brim).

I also tested printing “part” lying on its mushroom-shaped head or at a 45° angle; however, I actually got the best results at 90° (with the pen horizontal).

Translated with DeepL.com (free version)

Tagi