Tool : Scoop With Latched Cap To Release
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scoop One End, Pour Out The Other End
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- GNU General Public License v3.0
Had a request from a family member, who wanted to scoop bird seed and put it into a bird feeder or a bottle, without making a mess.
Thankfully, I came across a brilliant design from vas__design and tweaked it slightly.
Now you can scoop up using the original large end, then release the seed through the smaller end, once the latched cap is rotated a couple of mm's. I had a "+" to the cap, just in case you struggle to undo the latched cap, it shouldn't be needed, but thought just in case, I'll add it.
I made mine using SUNLU PLA+ filament in Brown Coffee. To print both parts in one session, you need 178g of filament and allow 07hr 56m, using the 3MF file supplied in the project.