Small foot for Kossel or any application with 20xXX Aluminum extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple foot for an aluminum frame printer. I made it for an Anycubic Kossel, but it would work anywhere. Made…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 144
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Just a simple foot for an aluminum frame printer. I made it for an Anycubic Kossel, but it would work anywhere. Made for M4 hardware, but M5 may also fit with a little drilling. I made mine from PETG, but a flex filament would be better, I think. I'll be re-making mine in TPU.
Print Settings
Printer:
Any, or one that works well with flex filament
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
12% or what you want
Filament:
Uncle Schoe's Back Country Moonshine Bucket Brewt Any, or Flex
any Post-Printing =============
Just screw them in with 10-12 mm hardware and T-nuts. You probably have that in the old Altoids box you toss extra kit hardware into.
Category: 3D Printer Parts