Cafelat Robot Leg Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leg extension for the Cafelat Robot , to accommodate bigger cups / scales
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
slim-profile leg extension for the Cafelat Robot . It raises the base by the height you choose, providing essential extra clearance for taller cups and thicker espresso scales while maintaining a sleek, minimalist look that complements the Robot's design
Since this part needs to withstand the heavy downward force applied during espresso extraction please follow the print setting below
Print Settings:
Material: PETG ,Strong PLA+
Perimeters (Walls): 4 to 5 minimum.
Infill: 40% - 50% (Gyroid pattern is highly recommended for equal force distribution).
Installation:
To install these, you will need M6 metric socket head cap screws that are length of size you choose longer + length of the stock Cafelat screws.
Note: in my case i printed a 2 CM one and it has drastically improved clearance.
If you love my creation and it helped ,please consider supporting my work with a donation here so I can design more cool stuff!.