Useless box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
useless box with 5mm switch and 9g servos
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Its a useless box planned to be used with 9g servos and 5mm switches
required (scissors, glue, 10cm of filament, 5mm switches, 9g servos(with small arm) )
This is assembled build ->
There are 3 main printed parts :
The lid ->
The main housing ->
and the 9g servo arm ->
other parts are electronics :
(they are not 3d printed but are used to simulate functionality in cad)
ASSEMBLY :
first aline the hole in the lid with the hole in the main housing, then insert 1,75mm filament through the holes so that the lid is locked in place and cut off extra filament . For the servo 3d printed arm use a regular 9g servo arm (the one that comes with the motor) and fit it into the 3d printed arm fasten it with glue(Remember to reset servos before gluing). Now all assembly is done just glue your servo to the bottom of the housing so that it aligns well with the switch and voila now connect your servo and switch to your micro controller and code. 👌