7.17 Litre or 8.65 Litre Modular Panel Case for bc-250 with Proper Cooling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a modular case with better cooling, litres smaller than competitors using low profile CPU coolers for ultimat
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
7.17 or 8.65 litre Modular panel case for bc-250 with AXP120-X67 or SL-100 or JF13K cooler
I designed a modular case with better cooling, litres smaller than competitors using low profile CPU coolers for ultimate silence, temperature and budget using Thermalright AXP120-X67. Also a wide boy version for Jiushark JF13K and Thermalright SL-100.
I've added versions for 180mm bed printers. I did design this with 180mm printers in mind but reality got in the way and I had to space out the power supply. With careful clipping I've adjusted the front and rear panels.
Temperatures
in game are generally in the 60s as that’s were air cooling scales to. Furmark with an 8 core, 38cu(same as 36cu) at 3.9ghz/ 2.1ghz@1000mv results in 76C. I did initially design the processor side fans to use a single high airflow 120mm fan but found with overclocks the system heat soaked to about 8C hotter with much hotter idle.
The panels are individually shorter prints less prone to failure than other case designs. I opted to use 300mm 1515 extrusions for this design due to rigidity at over 300mm length. They also allow for a naked setup with panels removed for full access to the board while.
Over time the hope is the community will modify my square basic panels with cosmetic niceties, features like USB connectivity, ESP32 power on capability and cooling mods.
Comparison to other cases capable of furmark runs
55mm case for w/Arctic fans AXP120 314x121.4x188.12mm 7.17 litres(not including PCIe style mounts)
75mm for JF13k or SL-100 w/Arctic fans 314x146.4x188.12mm 8.65 litres
Old lamer Steam box 5 slim 177×122×418.5 mm 9.04 litres (unable to maintain furmark temperatures)
Old lamer xbox series x copy 177×159×418.5 mm 11.38 litres
one2hr bc250 case ver. 2.0 fractal north influenced 204x369x190mm 14.3 litres
SebastienGau_4340160 249x199x372mm 18.43 litres(rough estimate)
Deepcool CH160 plus 375mm x 195mm x 323.5mm 21 litres
While furmark is a synthetic load and not indicitive of current game loads future kernel and other updates are likely to increase cpu/gpu utilisation and temperatures. Resizable bar hopefully is the next step.