1 / 3
AIO Tube Organizer Clip - MAINGEAR MODS — zdjęcie 1
1 / 3

AIO Tube Organizer Clip - MAINGEAR MODS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Keep your AIO tubes neatly paired for a cleaner-looking build.

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed by MAINGEAR. Printed by you. Because the next upgrade doesn’t always need a power cable.

The MAINGEAR MODS AIO Tube Organizer holds two cooling tubes side by side for a cleaner, more organized build.

Print it to match your setup, or add a pop of color. Use one clip or space multiple clips along the tubes to suit your layout.

Printing instructions

  • Print flat side down on the build plate. (Top or Bottom)

  • PLA is not recommended for this application.

  • Use a material suitable for the temperatures inside your PC and flexible enough to allow the clip to snap onto the tubes without cracking.

  • Print one clip first and check the fit before printing more.

Compatibility

Designed for AIO cooling tubes with an 11 mm outer diameter, including any sleeving. Check your tubing before printing, and test one clip for fitment. The clip should hold the tubes securely without pinching or compressing them.

Installation

Gently press each tube into its channel, then position the clip where the tubes naturally run alongside each other. Keep the tubing’s natural curve and avoid forcing tight bends or pinching the hoses.

Got the clip. Need the PC? Get one here

Tagi