Philips 3200-Series Compatible Front Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement-style compatible front plate for a Philips 3200-series coffee machine.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement-style front plate designed around a Philips 3200-series coffee machine. This is an independent compatible design, not an official manufacturer part.
Print guidance
Use PETG, ABS, ASA, or another heat- and moisture-tolerant filament.
Use 3 to 4 perimeters and at least 20% infill for a durable panel.
Print a small fit test or verify critical dimensions before printing the full part.
Installation
Compare the model against your original front plate before removing any parts.
Confirm your machine revision, tabs, openings, and mounting points match.
Install gently; do not force clips or fasteners.
Keep printed parts clear of hot surfaces, moving mechanisms, and food-contact areas unless you have confirmed material suitability.
Included files
STL, 3MF, and editable Fusion 360 source.
License and safety
This model is shared under CC BY-NC-SA 4.0. Commercial use requires permission from the creator. Print, install, and use at your own risk. Verify fit and suitability for your application before relying on a printed part.