Poly/SnapDryer chamber heater adapter for IKEALLER top hat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PolyDryer / SnapDryer heated-chamber adapter panel for Snapmaker U1 (IKEALLER v2.3)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a printed replacement for the acrylic top panel of the IKEALLER v2.3 enclosure. Two seats in the lid let you drop a Polymaker PolyDryer or Snapmaker SnapDryer straight into the chamber, so the dryer's warm air heats the printer instead of the room. Print in PETG, 0.2 mm, supports ON — the panel comes in four parts that are glued together along the overlaps. In the extra files there's a Snapmaker U1 profile with two materials (PETG + a support interface material) so the supports pop off cleanly. Real result: with the bed at 100 °C and the dryer on max, the chamber reached 40–45 °C in about 20 minutes, and ABS printed fine.
IKEALLER Top hat link : https://makerworld.com/en/models/2494052-snapmaker-u1-ikealler-top-cover?from=search