Foot Positioner for Knee Surgery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed foot positioner for knee surgery, for a 90° bent 15 mm round bar. Part of a positioner series.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Overview
This is a foot positioner for knee surgery, available in two versions to fit different operating table bars. It was developed at the 3D Printing Laboratory of the Simulation Center at Hospital de Clínicas – UFPR (Curitiba, Brazil), and is part of a series of positioners for knee surgery. See also the knee positioners:.Versions
Round bar: fits a 90° bent bar with a circular cross-section of 15 mm diameter.
Flat bar: fits a 90° bent flat bar [dimensions].
Check which type of bar your table uses and download the corresponding file.
Disclaimer
This model is not a certified medical device. It is shared for educational, research and prototyping purposes. Any clinical use is the sole responsibility of the user and must follow local regulations and institutional protocols. Standard FDM thermoplastics such as PLA and PETG do not withstand autoclave sterilization. Use outside the sterile field, under sterile draping, or with a validated low-temperature sterilization method.