1 / 3
Velthara, Queen of the Moonveil Brood | 32mm & 75mm Fantasy Miniature | FDM & Resin — zdjęcie 1
1 / 3

Velthara, Queen of the Moonveil Brood | 32mm & 75mm Fantasy Miniature | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Deep beneath the towers and moonlit halls of the Moonveil lies a sanctuary even the Dark Elves approach with reverence.

Ocena
0 / 5
Polubienia
11
Pobrania
60
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Deep beneath the towers and moonlit halls of the Moonveil lies a sanctuary even the Dark Elves approach with reverence.

There waits Velthara, Queen of the Moonveil Brood.

Once among the most powerful high priestesses of the Moonveil, Velthara sought communion with the ancient entity worshipped by her order as the Spider Queen. The ritual granted her wish—but not in the manner she expected. Priestess and colossal spider were bound together, creating a living avatar through which the will of the Spider Queen could enter the mortal realm.

Now Velthara rules the sacred Brood beneath the Moonveil.

Her enormous arachnid body is protected by thick chitin, massive fangs, and powerful segmented legs capable of carrying her across walls, ruins, and battlefields with terrifying speed. Rising above the creature is Velthara herself, still bearing the regal appearance of the Dark Elf priestess she once was. Horns crown her head, ritual armor protects her body, and a massive crescent-bladed weapon serves as both ceremonial symbol and instrument of execution.

While Vaelira Nightthorn commands the armies and Shadow Court of the Moonveil, Velthara holds authority over its darkest religious mysteries.

Even Moonveil commanders enter her sanctuary carefully.

For Velthara does not serve the Shadow Court.

She serves the Spider Queen.

Designed as a major boss miniature, Velthara is an ideal centerpiece for the Temple of the Spider Queen, where adventurers can confront her as the climax of a Moonveil campaign or encounter.

The model is designed for both 32mm tabletop scale and 75mm display scale, with simplified, reinforced geometry intended to make this enormous creature practical for both FDM and resin printing.


Velthara — D&D 5e-Compatible Boss Stats

Large Monstrosity (Dark Elf), Lawful Evil

Armor Class: 18
Hit Points: 225
Speed: 40 ft., climb 40 ft.

STR 20 (+5)
DEX 18 (+4)
CON 20 (+5)
INT 16 (+3)
WIS 18 (+4)
CHA 20 (+5)

Saving Throws: Dex +9, Con +10, Wis +9, Cha +10
Skills: Arcana +8, Intimidation +10, Perception +9, Religion +8
Damage Resistances: Poison; bludgeoning, piercing and slashing from nonmagical attacks
Condition Immunities: Frightened, Poisoned
Senses: Darkvision 120 ft., Tremorsense 30 ft., Passive Perception 19
Languages: Common, Elvish, Undercommon
Challenge: CR 15

Spider Climb

Velthara can climb difficult surfaces, including ceilings, without making an ability check.

Web Walker

Velthara ignores movement restrictions caused by webbing.

Magic Resistance

Velthara has advantage on saving throws against spells and other magical effects.

Aura of the Brood

Spiders and allied Moonveil creatures within 30 feet of Velthara have advantage on saving throws against being frightened.

Legendary Resistance (3/Day)

If Velthara fails a saving throw, she can choose to succeed instead.


Actions

Multiattack. Velthara makes three attacks in any combination using her Crescent Glaive, Spider Fang, or Impaling Leg.

Crescent Glaive. Melee Weapon Attack: +10 to hit, reach 10 ft., one target. Hit: 15 (2d8 + 6) slashing damage plus 7 (2d6) necrotic damage.

Spider Fang. Melee Weapon Attack: +10 to hit, reach 5 ft., one creature. Hit: 16 (2d10 + 5) piercing damage plus 14 (4d6) poison damage. The target must succeed on a DC 17 Constitution saving throw or become poisoned until the end of its next turn.

Impaling Leg. Melee Weapon Attack: +10 to hit, reach 15 ft., one target. Hit: 14 (2d8 + 5) piercing damage. A Large or smaller creature must succeed on a DC 17 Strength saving throw or be knocked prone.

Brood Web (Recharge 5–6). Velthara launches supernatural webbing at a point within 60 feet. Creatures within a 15-foot-radius area must make a DC 17 Dexterity saving throw or become restrained. A restrained creature can use its action to make a DC 17 Strength check, freeing itself on a success.


Legendary Actions

Velthara can take 3 legendary actions, choosing from the options below.

Skitter. Velthara moves up to half her speed without provoking opportunity attacks.

Crescent Strike. Velthara makes one Crescent Glaive attack.

Venomous Fang (Costs 2 Actions). Velthara makes one Spider Fang attack.

Call the Brood (Costs 3 Actions). Velthara summons a swarm of spiders or an appropriate spider creature chosen by the DM. The summoned creature acts immediately after Velthara and remains until destroyed.


Phase II — Wrath of the Spider Queen

The first time Velthara is reduced to 0 hit points, the encounter does not immediately end.

Dark energy erupts from the altar as the Spider Queen's power overwhelms her mortal vessel.

Velthara immediately regains 100 hit points, ends all conditions affecting her, and enters Wrath of the Spider Queen.

For the remainder of the battle:

  • Her movement and climbing speed increase to 50 ft.

  • Her Spider Fang deals an additional 2d6 poison damage.

  • Her Impaling Leg attacks have a 20-foot reach.

  • She gains four Legendary Actions per round instead of three.

  • Creatures beginning their turn within 10 feet of Velthara must succeed on a DC 17 Wisdom saving throw or become frightened until the beginning of their next turn.

This transformation turns Velthara into the true final threat of the encounter and works especially well when fought within the Temple of the Spider Queen.


⚙ Print Specs

  • Scales: 32mm tabletop and 75mm display

  • Type: Boss miniature / Dark Elf Spider Queen

  • Faction: Moonveil Dark Elves

  • Role: Legendary Boss / High Priestess / Brood Queen

  • Recommended Resin Layer Height: 0.05mm

  • Recommended FDM Layer Height: 0.08–0.12mm

  • Materials: Resin, PLA/PLA+

  • Geometry has been intentionally simplified and reinforced compared with traditional highly detailed spider miniatures to improve FDM printability.

  • Scale can be increased for an especially imposing boss or display piece.

🧱 FDM Printing

Velthara has been designed with FDM printing in mind, using thicker spider legs, larger armor forms, stronger weapon geometry, reduced micro-detail, and fewer extremely thin projections.

For best results, a 0.2mm nozzle is recommended at 32mm scale where maximum detail is desired. A 0.4mm nozzle should work particularly well when printing the model larger or at the 75mm display scale.

A 0.08–0.12mm layer height is recommended.

Tree/organic supports are recommended around the humanoid body, weapon, hands, underside of the spider, fangs, and raised portions of the legs.

Because this is a large boss model with widely positioned legs, use a brim if additional bed adhesion is required.

🧪 Resin Printing

For maximum facial, armor, chitin, and weapon detail, 0.05mm layers are recommended.

Tested ResinQuestMiniatures Saturn 4 Ultra 16K baseline:

  • Layer Height: 0.05mm

  • Bottom Layers: 5

  • Normal Exposure: 2.75s

  • Bottom Exposure: 37s

  • Transition Layers: 10

  • Rest Times: 2 / 2 / 4s

  • Anti-Aliasing: 8

  • Print-Time Compensation: 0.93s

  • PWM: 255 / 255

Adjust these settings for your specific resin, printer, temperature, and printing environment.

Supports & Orientation

For resin, begin with Chitubox Auto Orientation + Auto Supports — Light, followed by manual inspection.

Pay particular attention to the spider's legs and tips, fangs, underside, Velthara's arms and hands, hair, horns, weapon, and any isolated armor details.

Because the face, upper torso, spider head, and front armor are major focal points, avoid placing heavy support contacts on these highly visible surfaces whenever possible.

For FDM, orient the model or individual components to minimize support contact with Velthara's face, spider eyes, front fangs, and major armor surfaces.

Tagi