Chase Educational Box - inspired by Paw Patrol

A complete 3D-printed play and learning box built around Chase the police pup. Everything fits inside its own crate, and every part is set up for multicolour printing.

Rubble, Marshall And Skye Are Out Now - Us$5 Each On Cults3d

• Rubble the construction pup: push-fit figure, flexi pup, flexi dog, his show bulldozer with snap-lock wheels, a Gear Works puzzle and his crate: https://cults3d.com/en/3d-model/game/rubble-educational-box-inspired-by-paw-patrol

• MARSHALL IS OUT NOW: the fire pup box with his fire truck, US$5 on Cults3D: https://cults3d.com/en/3d-model/game/marshall-educational-box-inspired-by-paw-patrol

• SKYE IS OUT NOW: the aviator pup box with her jet-copter, US$5 on Cults3D: https://cults3d.com/en/3d-model/game/skye-educational-box-inspired-by-paw-patrol

• SAVE 20% ON THE PAID PUPS: Rubble + Marshall + Skye together in one bundle on Cults3D (about US$12 instead of US$15): https://cults3d.com/en/bundles/paw-patrol-inspired-pup-kits-bundle-rubble-marshall-skye-multicolor-flexi-figure-kits

Get A Discount On Any Paid Pup

• Like this model: get 15% off.

• Post a Make (a photo of your printed Chase): get 25% off.

• Your discount works on any paid pup box: Rubble, Marshall and Skye now, and every pup after that.

• How to claim: like or post your make, then send me a message on Cults3D with your username (and a link to your make) and I will send you a personal discount code.

Free Download - And The Start Of The Series

• Chase is free. He is the first box in a series of Paw Patrol-inspired educational boxes.

Update 3 November 2026 (2) - Cap Badge And Backpack

• Cap badge now sits flat on the cap; backpack no longer shows brown (the backpack's base and its supports print in police blue). Reprint only the head and the backpack; the previous files are in 'Chase - previous version (3 Nov 2026).zip'.

Update 3 November 2026 - No More Fins, New Badges, Better Single-colour Files

• Chase has had a free upgrade:

• Figure: no more snap-off fins. Turn on supports in your slicer (tree supports, auto); the OrcaSlicer project already has them set, printed in dark brown (police blue for the backpack).

• Figure: a gold chevron patch on his left shoulder, like on the show (the paw shields on his shoulders are gone). The cap badge and the collar star tag are now neat low relief with bevelled edges, the cap badge sits a little higher and the yellow cap band is a clean, even strip.

• Single colour: each figure part is now one complete file in print orientation with all its details. The puzzle numbers, dots and title, the crate lettering and star badges, the cruiser's "02" and badge, the flexi dog's eyes and the wheel hubs are raised (or recessed on the bed face), so they still show when you print in one colour.

• MULTICOLOUR files: every file now uses the same 8 colour slots as the project (1 dark brown, 2 tan, 3 police blue, 4 gold-yellow, 5 white, 6 black, 7 pink, 8 red).

• Changed parts: the figure head, body and backpack. If you print single colour, re-download the single-colour STLs.

• Earlier update (2 November 2026): the figure's backpack fit is looser, the collar, zipper, cap band and hem were raised, and the cruiser got raised stripe, grille and lights, gold 5-spoke hubs, four cones and black axles.

• Earlier update (20 October 2026): the wheels click onto snap-lock axles, so they no longer slide off, every moving part has more clearance, and the cruiser sits higher, so it rolls without dragging.

• Earlier update (13 October 2026): Chase has had a big show-accuracy update, plus some fixes:

• The police cruiser is rebuilt as Chase's open-top police truck from the show: light bar, star badge and "02", stripe, grille, push bar with winch, star hubs and two traffic cones.

• Puzzle: the numbers are now big and blue, so they are easy to read (they were gold on white). The 10-dot cell now really prints 10 dots (two dots used to merge). Bolder title and Chase's own star badge.

• Crate: "LEARN & PROTECT" is now in readable blue, with his star badge on the sides.

• Flexi pup: golden-tan face with his brown stripe, a yellow cap band and a paw-shield badge. A seam on the body that could print badly is fixed.

• Flexi dog: paw-shield cap badge with a yellow band, all-blue pup pack and pink inner ears.

• Figure: 15 print fixes (neck socket, cap brim, backpack fit, colour clean-up, pegs and more).

• New OrcaSlicer project and slices for the whole box.

• If you already printed Chase, the new files are a free upgrade - re-download them.

What's In The Box

• Chase figure (about 10 cm tall): a push-fit kit. The head snaps onto a neck pin and turns, and the backpack slides onto two pegs. The cap badge, the gold chevron patch on his left shoulder and the collar star tag are raised in low relief, the collar, vest zipper, cap band and vest hem stand out in relief, and the fur and cloth textures are modelled in.

• Flexi pup: a print-in-place wiggle pup that curls up, with no assembly. Golden-tan face with his brown stripe, police cap with a yellow band and a paw-shield badge.

• Flexi dog: a lying fidget dog that prints in place in one go. The body wiggles on four hidden pin joints, and both front legs swing on their own shoulder pins (30° out, 5° in). Chase has his police cap with a yellow band and paw-shield badge, upright ears with pink insides, blue vest and an all-blue pup pack.

• Police cruiser: Chase's open-top police truck from the show. Sloping bonnet and windscreen, a bucket seat, a red and blue light bar on a roll bar, a raised white and yellow side stripe with his star badge and "02" on the rear quarter, a raised black grille with a paw shield, raised headlights and tail lights, a push bar with a winch, gold 5-spoke wheel hubs and four red and white traffic cones that sit in pockets in the back. It rolls on 4 wheels that click onto 2 snap-lock axles, so they spin freely and do not slide off.

• Number puzzle: a counting board with dot patterns 1–10 and 10 number tiles to match (early maths: counting, number recognition). Big blue numbers on white tiles, a bold title and Chase's star badge.

• Crate: the storage box with a lid and a press-in carry handle, with Chase's star badge on the sides and "LEARN & PROTECT" in blue. The figure, flexi pup, flexi dog, cruiser (with its cones) and puzzle all fit inside.

Files

• OrcaSlicer project: all parts laid out on 5 plates in print orientation (the flexi dog has its own plate), with 8 filament slots already assigned.

• A MULTICOLOUR 3MF for every part, ready for AMS, ERCF, MMU or any multi-material setup.

• Single-colour STLs for every part, for printing in one colour and painting: the figure parts are one file each in print orientation, and the lettering, numbers, dots, badges and hub spokes are raised (or recessed on the bed face) so they still read in one colour.

• Previous versions (20 October, 2 November and 3 November 2026) are kept in 'Chase - previous version (20 Oct 2026).zip', 'Chase - previous version (2 Nov 2026).zip' and 'Chase - previous version (3 Nov 2026).zip' for reference.

Print Settings (tested on a Voron 2.4 300 with an 8-gate ERCF)

• 0.4 mm nozzle, 0.20 mm layers, PLA

• The figure's head, body and backpack have overhangs: turn on supports in your slicer (tree supports, auto, work well); the OrcaSlicer project already has them set. Everything else prints without supports.

• The crate box and lid are 238 x 180 mm and 234 x 174 mm: they need a bed of at least 240 x 185 mm.

• Colour slots: 1 dark brown, 2 tan, 3 police blue, 4 gold-yellow, 5 white, 6 black, 7 pink, 8 red.

• Joints use fixed clearances (0.5 mm radial, 0.3 mm vertical), so do not scale the parts.

• The project uses 3 walls, 15% infill, bed 60 °C and PLA at 235 °C (tuned for a fast Voron; on a slower printer use your filament's normal temperature). Print the first layer slowly and not over-squished: an elephant-foot first layer can fuse the flexi joints.

• Flexi pup and flexi dog: let them cool on the bed, then gently flex every joint once to free it.

Assembly

1. Push the head straight down onto the neck pin until it clicks.

2. Slide the backpack onto the two pegs on the back.

3. Push the axles through the cruiser body, then press a wheel onto each axle end until it clicks (squeeze the split end to take a wheel off again). Print the axles lying flat on their flat side at 100% infill. Drop the four cones into the pockets in the back.

4. Press the handle into the crate lid.

Safety

• For ages 3 and up. Not for children under 3: the figure parts, tiles, cones, axles and wheels are small parts and a choking hazard.

• Home-printed PLA is not a certified toy material. Adult supervision recommended; check prints for sharp edges and remove all support material before play.

Fan-made and inspired by Paw Patrol. Not affiliated with, licensed or endorsed by Spin Master or Nickelodeon.