Ford Mustang 1966 Coupe

Edit2: Windows left and right added as single pieces, also simplified. I could print them just standing upwards, some raft needed / and or brim. So I printed the black car also with windshields fromt and rear upwards, texture is much nicer! Black car was put 100% on the build plate, then cut in two horizontal pieces. The bottom plate of the car is not 100% even, some curves in it. And for printing and support reasons I put the car ON the plate, z=0. Then cut 25mm above and used the cut planes as bottom parts on the build plate, after that just glued it together. Easy work, the departing line disappeared in the layer lines. Printed on Sovol SV08 with 0.6mm nozzles, 0.3mm lh whereas I did an adaptive variable height.
After glueing I sanded mainly the top parts from major layer lines. Did not want to oversand it. Finally put some clear coat (spray) on the outer sides and the top sides, bottom not.
I used Prusament Galaxy Black for the body parts, rest like described below.

NOTE: If you judge the photographs by the design and print quality, let me assure you they look 100% better than on the photographs. Thanks to iPhone photo abilities the photos show much more detail very often than wanted. LOL!

Edit1: 01-Chassis.stl had already Windows on one side, I had to remove.

Took a.m. model and imported to TinkerCad. Remodelled windows, bumpers and overall size. Printed in two parts, cut in the middle. Added resized license plate with initials of my friend. This is a birthday present.

Printed in PLA and tires in TPU. Prusament Lipstick Red, Silk Silver. Some supports needed. Easy to remove.

I left windshield wipers and mirrors and door handles out, they break away first.

Explore my other Printables: https://www.printables.com/de/@Tritschi