1 / 2
Skådis Guitar Fretboard Radius Gauge Holder — zdjęcie 1
1 / 2

Skådis Guitar Fretboard Radius Gauge Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skådis-compatible holder for guitar fretboard radius gauges (customizable).

Ocena
0 / 5
Polubienia
2
Pobrania
0
Wydruki
0
Wyświetlenia
21
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple organizer for guitar fretboard radius gauges, designed around the common AliExpress-style sets. Mounts to an IKEA Skådis pegboard.

The included FreeCAD project is parametric, with customizable settings including gauge count (9 by default), slot thickness, spacing, and other dimensions. Large parameter changes may occasionally break some fillets or chamfers, but these should be straightforward to reconstruct.

Designed and modelled manually in FreeCAD. AI was used for troubleshooting, design planning, and general advice.

Printed successfully on an Elegoo Centauri Carbon:

  • 0.4 mm nozzle

  • 0.16 mm layer height

  • 4 wall loops

  • 5 top / 3 bottom layers

  • 15% gyroid infill

  • Approx. 1.5 hour print time

A 0.20 mm layer height will likely also work well, but has not been tested.

If you found this design useful, you can buy me a coffee.

Tagi