Mini-14 Cheek Riser for the Samson A-TM Folding Stock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini-14 Cheek Riser for the Samson A-TM Folding Stock
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Cheek Riser for the Mini-14 with a Samson A-TM Folding Stock
This snaps on tight, but I would still put a little silicone glue or thin double-sided tape to hold it in place.
If you want it to look like a molded grip, use some 240-grit sandpaper to remove any high spots, seam lines, etc. Then, follow up with 400-grit sandpaper. Paint it with Semi-Gloss Krylon paint, specifically designed for plastic. Let it dry for about an hour, then mist it from about two feet away, holding the can carefully, so it has a little texture. Let the paint cure for at least 2 weeks for a long-lasting finish protected from the sun.