Dripbound Vigil Candle Relic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gothic melted-wax candle sculpture with anguished faces, a flame crown and a cracked stone base.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial
Dripbound Vigil is a decorative candle relic: an asymmetrical pillar of sculpted melted wax, anguished faces, a solid flame-shaped crown and wax tendrils flowing into a cracked stone plinth. The crown is sculpted wax; this model is not a candle holder.
Curious about making your own designs? Have a look at Infillery’s creative tools.
What’s included
One repaired, manifold STL
Approximately 56 × 55 × 75 mm
Single solid piece with a flat base and no separate parts
Printing
Print base-down at the supplied 75 mm height, or scale uniformly
0.20 mm layers; 3 perimeters; 15–20% infill
PLA or PETG; matte or silk filament suits the wax appearance
Inspect open mouths, noses and deep folds; use build-plate supports where your preview flags steep overhangs
Notes
The supplied STL has been geometry-validated in Bambu Studio. Support needs vary with scale, layer height and cooling.
Atmospheric gallery images are digital visualisations of the expected FDM appearance. Neutral grey multi-angle images are direct renders of the generated mesh.
Licence and attribution
Original design by Infillery Originals. Please follow the licence displayed on this listing, including its attribution and non-commercial conditions where applicable.
More from Infillery
Explore original designs, customisation and licensing enquiries at https://infillery.com.
Printed this model? Share a Make. We would love to see your filament colours and finish.