KT-2000 Media Separator Strainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sieve Attachment
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v2.0
Overview This custom strainer accessory is designed specifically for the KT-2000 rotary tumbler barrel. It makes separating your polished parts, brass cases, or 3D prints from the tumbling media (ceramic, stainless steel pins, walnut shell, or plastic media) fast, clean, and effortless.
Instead of pouring the barrel contents into a separate external sieve, this accessory attaches directly to the mouth of the KT-2000 drum, allowing you to drain liquids and sift out media in seconds without losing small components.
Key Features
Perfect Fit: Snugly interfaces with the opening of the original KT-2000 rotary barrel.
Efficient Media Separation: Optimized grid geometry retains processed parts while allowing media and rinsing water to flow out freely.
Mess-Free Operation: Keeps wet or dry media contained directly over your bucket or sink.
Durable Design: Reinforced rim to withstand repeated dumping and rinsing.
Print Settings
Material: PETG or ASA recommended (excellent resistance to water, soaps, chemical compounds, and impact). PLA works for dry media.
Perimeters/Walls: 3 or 4
Infill: 25% – 40% (Grid or Gyroid)
Layer Height: 0.20mm
Supports: No supports required if printed flat on the build plate.