Kel-Tec Sub-SDP Bolt Block Fixture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bolt block for the Kel-Tec SDP that allows you to lock the bolt open. PETG works best, but PLA should be fine.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bolt block fixture for the Kel-Tec Sub-SDP that allows you to lock the bolt open, either for loading/unloading, or for ranges that require a bolt-clear indication.
Start by clamping the block to the receiver tube, with the notches facing forward towards the muzzle, at either the two o'clock or the ten-o'clock position. Then, with the weapon facing a safe direction, pull the charging handle to the rear, and rotate the fixture to block the bolt. When needed, ensure that your fingers are clear of the area, and rotate the fixture the opposite direction to allow the bolt to travel forward.
The weapon can be fired with the fixture in place, but I suggest that you ensure that it rotated away from your face to prevent contact.
PETG works best, but PLA should be fine.