1 / 3
Uzaki Tsuki -Glitter & Glamours - Maid Ver. Figure Base Extension — zdjęcie 1
1 / 3

Uzaki Tsuki -Glitter & Glamours - Maid Ver. Figure Base Extension

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip on base extension for the Uzaki Tsuki -Glitter & Glamours - Maid Ver. figure to solve the instability issues.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
163
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I created this model as a non destructive, non permanent, add-on to the original base to solve the instability problem of the original base.
Simply clip this in to the bottom of the original base and now your Uzaki Tsuki figure won't fall over if you look at it wrong!

I printed in PETG, but PLA works great too.

Recommended print settings for PLA/PETG

  • Layer height: 0.2 mm

  • Infill: 15%

  • Infill pattern: Grid

  • Brim: Optional

Tagi